Overview, Description, Key features – Teledyne LeCroy CP150 User Manual
Page 9: Accessories
![background image](/manuals/353486/9/background.png)
Instruction Manual
922175-00 Rev A
3
Overview
Description
The CP150 uses a combination of Hall effect and transformer technology which enables measurements
to be made on DC, AC and impulse currents. It has a 10 MHz bandwidth and is designed to measure
continuous currents up to 150 Amp.
The probe can be used with a WaveRunner, LC, and WavePro series oscilloscope with firmware 4.3.0.0
or higher. With the ProBus interface, the CP150 becomes an integral part of the oscilloscope. The
bandwidth limit, auto zero and degauss functions are all controlled from the oscilloscope’s graphical
user interface. The oscilloscope provides power to the probe, so no external power supply is needed.
Key Features
• Highly accurate current measurements
• Easy current measurements
• Wide bandwidth
• Compact
• Over-current protected
Accessories
Certificate of Calibration
Instruction Manual CP150-OM-E