Teledyne LeCroy WaveLink Differential Probe Series (8-13 GHz) - Manual (Page 14)

WaveLink Medium-Bandwidth (8-13 GHz) Differential Probe
Differential Amplifier Small Tip Modules
Differential Amplifier Small Tip Module models D830, D1030, and D1330 connect to the
platform/cable assembly and accept differential interconnect leads and tips to provide the user with
flexibility in connecting the probe to the circuit under test without degrading the electrical
performance.
This module contains the active amplifier circuitry and performs the important task of amplifying the
low-level signal at the probe tip for transmission to the oscilloscope via the platform/cable
assembly.
The amplifier modules are sold with a set of solder-in interconnect leads and a square-pin lead. See
"Solder-in Interconnect Lead" on page 19 and "Square Pin Lead" on page 10.
Amplifier Module (includes solder-in interconnect leads) Product Code
8 GHz WaveLinkWaveLink D830
8 GHz/3.5Vp-p, +/-4V Offset Range, and +/-4V Common Mode Range Differential
Amplifier Small Tip Module with Dxx30-SI Solder-in Tip (Qty. 2) and Dxx30-SP Square
Pin (Qty.1). Also Includes Replacement Resistors (Qty. 10), Tip Retaining Clips (2 Vials
of 5), Ground Lead (Qty. 1), Ground Clip (Qty. 1), and Protective Storage Case. Must be
ordered with a WL-PLINK-CASE 13 GHz Platform/Cable Assembly to achieve
warranted calibration. D830
10 GHz WaveLinkWaveLink D1030
10 GHz/3.5Vp-p, +/-4V Offset Range, and +/-4V Common Mode Range Differential
Amplifier Small Tip Module with Dxx30-SI Solder-in Tip (Qty. 2) and Dxx30-SP Square
Pin (Qty.1). Also Includes Replacement Resistors (Qty. 10), Tip Retaining Clips (2 Vials
of 5), Ground Lead (Qty. 1), Ground Clip (Qty. 1), and Protective Storage Case. Must be
ordered with a WL-PLINK-CASE 13 GHz Platform/Cable Assembly to achieve
warranted calibration. D1030
13 GHz WaveLinkWaveLink D1330
13 GHz/3.5Vp-p, +/-4V Offset Range, and +/-4V Common Mode Range Differential
Amplifier Small Tip Module with Dxx30-SI Solder-in Tip (Qty. 2) and Dxx30-SP Square
Pin (Qty.1). Also Includes Replacement Resistors (Qty. 10), Tip Retaining Clips (2 Vials
of 5), Ground Lead (Qty. 1), Ground Clip (Qty. 1), and Protective Storage Case. Must be
ordered with a WL-PLINK-CASE 13 GHz Platform/Cable Assembly to achieve
warranted calibration. D1330
8 924234-00