Teledyne LeCroy OE695G - Manual (Page 20)

OE695G Optical-to-Electrical Converter
14 922562-00 Rev A
8. If returning a product to a different country, also:

Mark shipments returned for service as a “Return of US
manufactured goods for warranty repair/recalibration.”

If there is a cost involved in the service, put the service cost in the
value column and the replacement value of the product in the body
of the invoice marked “For insurance purposes only.”

Be very specific as to the reason for shipment. Duties may have to
be paid on the value of the service.
Certifications
This Teledyne LeCroy accessory is CE Compliant and bears the CE mark.
EMC Compliance
EC D
ECLARATION OF
C
ONFORMITY
The OE695G Optical-to-Electrical Converter meets intent of the European
Council Directive 2006/95/EEC for Product Safety and 2004/108/EEC for
Electromagnetic Compatibility. Compliance was demonstrated to the following
specifications as listed in the Official Journal of the European Communities:
EN 61326-1:2006, EN 61326-2-1:2006 EMC requirements for electrical
equipment for measurement, control and laboratory use.
Electromagnetic Emissions:
EN 55011/A2:2002 Radiated and Conducted Emissions, Group 1, Class A
1,2
Electromagnetic Immunity:
EN 61000-4-2:2001 Electrostatic Discharge Immunity (±4 kV contact discharge,
±4 kV air discharge, ±4 kV vertical/horizontal coupling planes )
3
EN 61000-4-3:2006 RF Radiated Electromagnetic Field Immunity (3 V/m, 80 MHz
to 1 GHz; 3 V/m, 1.4 GHz to 2 GHz; 1 V/m, 2 GHz to 2.7 GHz , 80% amplitude
modulated with 1 kHz sinewave)
3
1 Emissions which exceed the levels required by this standard may occur when the probe
is connected to a test object.
2 This product is intended for use in nonresidential areas only. Use in residential areas
may cause electromagnetic interference.
3 Meets Performance Criteria “B” limits of the respective standard: during the
disturbance, product undergoes a temporary degradation or loss of function or
performance which is self-recoverable.