2 specifications, 1 package, 2 power requirements – Teledyne LeCroy Kibra DDR User Manual
Page 15: 3 environmental conditions, 4 switches, 5 leds, 6 recording memory size
Kibra DDR Protocol Analyzer User Manual
13
Specifications
Teledyne LeCroy
1.2 Specifications
1.2.1
Package
1.2.2
Power Requirements
1.2.3
Environmental Conditions
1.2.4
Switches
1.2.5
LEDs
The LEDs illuminate as follows:
1.2.6
Recording Memory Size
4 Gigabyte DRAM for traffic data capture, timing, state and other data
Dimensions
10.0 x 8.5 x 1.9 inches
(25.5 x 21.5 x 4.8 cm)
Connectors
DC power connection
Trigger IN/OUT input (BNC)
host machine connection (USB, type B)
Data connector (Data In/Out, 9‐pin DB)
Weight
2.6 lbs. (1.1 kg)
Input Power
90 to 254 VAC, 47 to 63 Hz (universal
input), 100 W maximum
Operating
Temperature
0 to 55°C (32 to 131°F)
Storage Range
‐20 to 80°C (‐4 to 176°F)
Operating Humidity
10 to 90%, non‐condensing
Operating Altitude
Up to 6560 feet (2000 meters)
Power
on/off
LEDs
Illumination
Status
Power
(Green)
Analyzer is powered on
Status
(Red)
Analyzer failed to boot
(Solid Blue)
Analyzer is ready
(Flashing Blue)
Downloading bus engine
Trigger
(Yellow)
Trigger occurred