Teledyne LeCroy SierraNet M168 User Manual Ver.1.40 - Manual (Page 189)

SierraNet M168 Protocol Analyzer User Manual 187
Interface LeCroy Corporation
FC InFusion test scripts are called Scenarios. Scenarios determine how the hardware
device monitors and modifies line traffic. In order to create and download Scenarios the
Teledyne LeCroy FC InFusion Protocol Suite application must be used.
For the FC InFusion connections, the device is connected between the PHYs of the
originator and responder.
4.3 Interface
The InFusion interface has the following panels:
New Scenario Button: Begins the Scenario creation process by displaying the Infusion
Scenario Manager dialog.
New Library Button: Creates a new library panel.
Library Panel: The Main Library window (on the left), which displays the available
Scenarios. You can create a New Scenario, Open Containing Folder, Copy Container Folder
Path, Add New Library, Rename Library or Remove Library.
Event Panel: Lists all the available events for Global Rules and Sequences.
Action Panel: Lists all the available actions for Global Rules and Sequences.
Port Configuration: Displays the port configuration dialog. See “Port Configuration for
InFusion” on page 187 .
Start Session: Runs a Scenario.
Stop Session: Stops a running Scenario.
4.4 Port Configuration for InFusion
Select File> New Project to display the Add Device to Project dialog (see Figure 4.2 on
page 188 ).
To record traffic both before and after the InFusion modifies (jams) it, select 
AJA (Analyzer/Jammer/Analyzer) in the Link Assignment column (or any other desired
configuration) and click OK.