Teledyne LeCroy SierraNet M168 User Manual Ver.1.40 - Manual (Page 213)

SierraNet M168 Protocol Analyzer User Manual 211
Scenario Example LeCroy Corporation
Figure 4.11: Copy Scenario
2. Place the cursor in the area below <New Scenario> in the Library pane, in the project
you want to paste in, right‐ click and select Paste Scenario.
Figure 4.12: Paste Scenario
4.6 Scenario Example
4.6.1 Example: Insert DWORD Matcher
In this example, the Global Rules panel of the Scenario waits for a Custom Frame then
inserts a Dword inside the frame. In Sequence 0 and State 0 it waits for an FCP SCSI
Command, SBC3; inserts a Dword inside the frame, beeps for a duration of 50 ms and
stops the Scenario.
Creating Global Rules
This section describes using the Global Rules panel of the Scenario for this example.
Recall that the Global Rules panel defines a single test state. The Global Rules do not have
the capacity for multiple states, so that area of a Scenario cannot change state.