Teledyne LeCroy PETracer ML Analyzer and Exerciser User Manual - Manual (Page 255)

PETracer ML User Manual Chapter 14: Updates and Licensing
Teledyne LeCroy
247
Chapter 14: Updates and Licensing
14.1 Updating the Analyzer
BusEngine™ and/or Firmware updates are now automatic processes that run anytime a
new version of the PETracer™ software is installed that is incompatible with the currently
installed BusEngine or Firmware. The update process generates onscreen instructions.
If, however, you need to manually perform BusEngine or Firmware updates, follow these
steps:
Step 1 Select Setup > Update Device … from the menu to display the
Update Analyzer dialog box for PETracer ML™:
Step 2 Select the appropriate file locations for the Firmware and/or BusEngine,
using Browse, if necessary.
Step 3 Check the appropriate options (if in doubt, check all options).
Step 4 Click Update to initiate the updating of the Analyzer.
Updating the Exerciser
To manually update the BusEngine and/or Firmware for PETrainer ML, follow the same
steps as above.