Teledyne LeCroy PETracer ML Analyzer and Exerciser User Manual - Manual (Page 42)

Chapter 3: Installation PETracer ML User Manual
34
Teledyne LeCroy
3.8 Connecting PETrainer ML to the Device Under Test
PETrainer ML can test both the host machine and device sides of a PCI Express link
through the use of two types of adapter:
• Motherboards and host controllers: Using a device emulation Interposer. A
device emulation Interposer is a PCI Express adapter card that fits into slotted
PCI Express devices.
• PCI Express add-on cards: Using a host emulation test fixture. A host emulation
test fixture is a box-like adapter with a slot for testing PCI Express cards.
Both of these test devices can be purchased from Teledyne LeCroy.
Device Emulator Interposer - Description
The Teledyne LeCroy Device emulation Interposer is an adapter that provides a way of
connecting a PETrainer ML Exerciser or PETracer ML Analyzer to a PCI Express
motherboard. The Interposer has two connectors: a connector for a data cable and an
edge connector for inserting the Interposer into a slotted DUT.