Teledyne LeCroy Summit T24 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 129)

Summit T24 PCI Express Multi‐Lane Protocol Analyzer User Manual 117
Go To Marker Teledyne LeCroy
2. Enter the time and format (seconds or clocks).
3. Click Go.
7.6 Go To Marker
Use this operation to go directly to a specific or transaction packet that has been marked
with a unique marker by the Set Marker operation.
To go to a marker:
1. Select Go To Marker from the Search Menu.
2. Select the marker you want from the fly‐out menu.
Alternatively, select All Markers to display the All Markers and Playlists dialog, then
select a marker and click Goto.
The packet you want appears at the top of the screen. Marked packets have a red bar on
the left edge.
7.6.1 Markers
This section explains the features of Markers. A marker is an entity that flags a physical or
logical item of interest within a trace file. A marker contains one or more attachments.
You can add a marker to a trace file or unmark a trace file by removing the marker.
Deletes selected Marker