Teledyne LeCroy Summit T24 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 95)

Summit T24 PCI Express Multi‐Lane Protocol Analyzer User Manual 83
Counter Teledyne LeCroy
Right‐click in the blue space in the Global or Sequence State and New Event > Counter >
UpStream or DownStream.
Figure 5.41: Setting Global and Sequence State Counter Events
5.22.2 How to Increment or Reset a Counter
You can Increment or Reset counters in the Global State and in the Sequence State by
performing the following steps:
1. Open the Recording Rules page, select an event, and drag it to the Global State or
Sequence cells. For details on these steps (see “Filter Out” on page 90 ).
2. Right‐click on an event and select Specify Actions > Increment Global Counter >
Global Counter 1 from the menu (see Figure 5.42 on page 84 ).