Teledyne LeCroy Summit T24 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 82)

Teledyne LeCroy Navigating Recording Rules
70 Summit T24 PCI Express Multi‐Lane Protocol Analyzer User Manual
Figure 5.25: Sequence State Events
In the Sequence State the Link State, Ordered Set, Errors, Counter and the Timer use
Basic Resources while DLLP and TLP use Packet Match Resources. There are four Timers
and four Counters in the Sequence State.
Note:
In each Sequence State up to six Basic Resources and six Packet Match Resources can be
defined.
5.19 Navigating Recording Rules
The Recording Rules window has three main areas, the Toolbar, Available Events panel
and the Main Display panel (see
Figure 5.15 on page 61 ).
5.19.1 Toolbar
The toolbar contains buttons such as the New Events button for issuing commands,
Delete Current Event, Undo, Redo, Zoom in and out, Show/Hide Channels and Properties.
Events
can be
added to
this
Sequence
State
Sequence
States