Teledyne LeCroy Summit T24 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 27)

Summit T24 PCI Express Multi‐Lane Protocol Analyzer User Manual 15
Using Probes Teledyne LeCroy
3.7.2 Example: Connecting the Summit T24 Analyzer to the Device Under Test
Using a Gen2 Multi-lead Probe for x1 and x4
Components
 iPass x4 to x8 Straight cable for x1 and x4 (see “iPass x4 to x8 Straight Cable” on
page 13 ).
 1 Multi‐lead Probe Pod for x1 and x4
Figure 3.12: Multi-Lead Probe Pod
 Up to 16 MidBus Probe SSMP Cables, and up to 8 Flexible Leads, per pod
Figure 3.13: Midbus Probe SSMP Cables
 1 Clock Cable (see Figure 3.10 on page 14 ).
Connections for Gen2 Multi-lead Probe
Overview
Use a 1‐pod setup.
For x1 or x4, use the iPass x4 to x8 Straight cable to connect the probe data connectors on
the Analyzer to the pod(s).
On the other side of the pod, connect the flexible lead tips.