Teledyne LeCroy Sierra M124 User Manual - Manual (Page 165)

Sierra M124 SAS/SATA Protocol Analyzer User Manual 163
Navigation + View Toolbar Teledyne LeCroy
Figure 3.81: Bookmark Found Example in Data Viewer Display
Highlight Set Time Stamp Origin and choose either Absolute, Trigger, Current Position, or
Based on system time.
3.6.2 Filtering
The Filtering menu and options allow you to modify data in the sample viewer display to
exclude packets with a set of user‐defined patterns and show the results in all views.
To set up filtering, you must have a viewer display open.
The Filtering menu has the options:
 Enable Filtering (see “Enable Filter” on page 174 )
 Filtering (see “Filter Setup” on page 164 )
 Link Layer (SAS)
 Transport Layer (SAS)
 Application Layer (SAS)
 Physical Layer (SATA)
 FIS Layer (SATA)
 Command Layer (SATA)
 Filter Idles (see “Filter Idle” on page 175 )