Teledyne LeCroy Sierra M124 User Manual - Manual (Page 231)

Sierra M124 SAS/SATA Protocol Analyzer User Manual 229
Port Configuration for InFusion Teledyne LeCroy
Figure 4.5: Device Ports Dialog
Alternatively, assign the scenario using the Library and Scenario drop‐down lists.
Figure 4.6: Scenario Drop-down List
After you have assigned scenarios to ports, in the first row of icons, use the first green
arrow icon to Run/Stop All Ports, or use the numbered green arrows to Run/Stop an
individual port.
Note: A port row is grayed‐out when that port is running a scenario.
4.3 Port Configuration for InFusion
The InFusion (Jammer) port configurations must match the Analyzer port configurations
for the infusion‐analyzer to work.
Select Configuration > Port Configuration to display the Select Port Configuration dialog
(see
Figure 4.7 on page 230 ).
To record traffic both before and after the InFusion modifies (jams) it, select 
Analyzer/Jammer/Analyzer on the port that you want to jam. In the following figure,
there is a match on Port 0.