Teledyne LeCroy Conquest User Manual - Users Manual - Manual (Page 97)

Protocol Analysis
87
Naming a Data Block
Each new data block is automatically assigned a sequential data block
number as it is created. To assign a unique descriptive name to a data block,
right-click the data block name to open the data block edit menu.
Choose Rename.
Enter a descriptive name in the New Name edit box and click OK.
Figure 62 Sample Active Data Block Hub Port Power
You can enter data in the defined cell structure by choosing one of the four
available methods. Define your own pattern, set a counter, choose a Random
Pattern or choose a Walking Bit Pattern