Vanguard CT-7000 - Manual (Page 43)

CT-7000 Operating Instructions
36
9.4 Save Timing Shots in the EEPROM
Use the steps in Table 10.0 to save a timing shot in the FLASH EEPROM.
Table 10.0 Save Timing Shot In EEPROM
STEP OPERATION ACTION DISPLAY
1 SELECT SETUP MENU. PRESS #3 KEY. 1. ANALYSIS POINTS
2. MEASUREMENT UNITS
3. SAVE / RESTORE
4. NEXT PAGE
2 SELECT SAVE MENU. PRESS #3 KEY. 1. SAVE SHOT
2. RECALL SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
3 SELECT SAVE SHOT. PRESS #1 KEY. SAVE SHOT # 002
TEST: CLOSE
DATE: 04/23/03 12:36
"ENTER" TO CONFIRM
4 CONFIRM SAVING SHOT. PRESS THE "ENTER"
KEY.
SAVE IN PROCESS
PLEASE WAIT
5 OBSERVE SHOT BEING SAVED. NONE. SHOT SAVE
6 RETURN TO MAIN MENU. PRESS ANY KEY. 1. TIME BRKR
2. GET RSLT
3. SET UP
4. DIAGNOSTIC
NOTE
Timing shot storage capability varies, depending upon the size of the shots.
The CT-7000 will assign an identification number for each of the shots stored in the
EEPROM.