Vanguard CT-7000 - Manual (Page 58)

CT-7000 Operating Instructions
51
9.14 Print a Breaker Test Plan
The user can print a breaker test plan stored in the CT-7000 EEPROM.
Table 18.0 Print a Test Plan
STEP OPERATION ACTION DISPLAY
1 SELECT SET UP MENU. PRESS # 3 KEY. 1. ANALYSIS POINT
2. MEASUREMENT UNITS
3. SAVE / RESTORE
4. NEXT PAGE
2 SELECT ANALYSIS POINT. PRESS # 1 KEY. 1. OPEN TIMING
2. CLOSE TIMING
3. PRINT SETTING
4. TEST PLAN
3 SELECT TEST PLAN. PRESS # 4 KEY. 1. LOAD TEST PLAN
2. PRINT TEST PLAN
3. PRINT DIRECTORY
4 SELECT PRINT TEST PLAN. PRESS # 2 KEY. LOAD TEST PLAN
“∧” “∨” TO SCROLL
"ENTER" TO SELECT
5 VIEW TEST PLAN HEADER. PRESS “UP” or
“DOWN” KEY TO
SCROLL.
DISPLAY TEST PLAN HEADER
6 CONFIRM TEST PLAN TO BE
PRINTED.
PRESS THE "ENTER"
KEY.
1.TIME BRKR
2.GET RSLT
3.SET UP
4.DIAGNOSTICS