Vestil EPT-30 - Manual (Page 26)

26
Curtis PMC 1207/1207A Manual 19
INSTALLATION AND WIRING: 1207A
MOUNTING
The 1207A controller can be oriented in any position, but the location should
be carefully chosen to keep the controller as clean and dry as possible. If a
clean mounting location cannot be found, a cover must be used to shield the
controller from water and contaminants.
To ensure full rated output power, the controller should be fastened to a
clean, flat metal surface with three screws. The case outline and mounting hole
dimensions are shown in Figure 2
A .
2 A — INSTALLATION & WIRING: 1207A Controller
2
A
Fig. 2 A
Mounting
dimensions,
Curtis PMC 1207A
controller.
66 (2.6)
28 (1.1)
122
(4.80)
152 (6.00) 6.3 (0.25)
22 (0.85)
66
(2.60)
4.8 (0.19)
21 Ч 16 Ч 1.5
(0.83 Ч 0.63 Ч 0.06);
8.4 (0.33) dia. hole thru
6.7 (0.265) dia.,
3 plcs
Dimensions in millimeters and (inches)
Status LED
CL
165 (6.50)
127 (5.00)