Vestil EPT-30 - Manual (Page 52)

52
Curtis PMC 1207/1207A Manual 45
6 — PROGRAMMER OPERATION
PEACE-OF-MIND PROGRAMMING
Each time the programmer is connected to the controller, it acquires all the
controller’s parameters and stores them in its temporary memory. You can revert
back to these original settings at any time during a programming session via the
Special Program Menu. Select “Reset All Settings” by scrolling it to the top of the
display window, press the
MORE INFO
key, and follow the instructions displayed.
Any inadvertent changing of parameters can be “undone” using this procedure—
even if you can’t remember what the previous settings were—as long as the
programmer has not been unplugged and power has not been removed from
the controller.
Programmer Self Test
You can test the programmer by displaying two special test screens. Press
the
MORE INFO
key while the programmer is powering up. During the Self Test,
you can toggle between the two test screens by pressing the
SCROLL DISPLAY
keys.
The first screen turns on every LCD element, and the second screen displays all
the characters used in the various menus. As part of the Self Test, you can also test
the keys be pressing each one and observing whether its corner LED lights up. To
exit the Self Test, unplug the programmer or turn off the controller, and then re-
power it without holding the
MORE INFO
key.
⇒
SCROLL
DISPLAY
⇐
@A B C D E FG H I J K L M NO
Q P R S T U VWX Y Z x Ω°
0 1 2 3 4 5 6 7 8 9 : ; < = > ?
! " # $ % & ' ( )
*
+ , - . /
>