Waterstone UNDER SINK SYSTEMS 4500 - Manual (Page 3)

A
B
C
D
E
F
G
Water from the blue supply tube (A) flows
through the PRV valve (B) and into the
faucet base (C). Water is then diverted into
the red tube (D) and into the Hot Tank (E).
The entering water displaces hot water in
the tank causing it to flow freely through
the clear “high temp” tube (F). Hot water
continues straight through the faucet and
exits the spout (G).
IMPORTANT - NEVER OPERATE THE
FAUCET WITH A KINKED CLEAR
OUTLET TUBE
Installation of the Pressure Regulator
Valve (PRV) is required to maintain
your warranty
OUTLET INLET
G
J
K
L
M
N
P
H
1.
COUNTER
OR SINK
2. 3. 4.
Slide washer (N) and thread
the nut (P) onto threaded
shroud. Hand tighten nut
underside of sink or counter. Turn faucet to the desired
handle position. Securely
tighten nut with adjustable
wrench.
FILTRATION FAUCET INSTALLATION
HOW A VENTED FAUCET WORKS
NEVER!
Slide escutcheon plate (G) and
clear vinyl washer (H) onto
threaded shroud (J) and up to
base of faucet. Fit flexible hoses (K, L, M)
through hole on counter or
sink. (No plumbers putty is
required. Vinyl washer seals
base).
CONNECTION TO A FAUCET OTHER THAN
A 3-LINE VENTED WILL VOID WARRANTY
AND CAUSE INTERNAL DAMAGE TO TANK
CONNECT A #5000 HOT TANK TO A FAUCET
AS SHOWN