Seite14, Important, Transportation – WolfVision VZ-15b User Manual User Manual

Page 14: Mirror cleaning, Exchanging a fuse

Advertising
background image

TRANSPORTATION

(all Visualizers)

IMPORTANT

IMPORTANT

For transportation press the release button for the arm (#11)
and at the same time push the arm down to the front of the unit.

DO NOT TRY TO PUSH DOWN THE ARM WITHOUT
PRESSING THE RELEASE BUTTON FOR THE ARM!

During transportation put a soft material (like paper) between the mirror and the working surface
- in order to prevent damage to the mirror !

The arm is equipped with a pneumatic damper, which makes the
arm set-up easy and holds it stable when working with the unit.

MIRROR CLEANING

(all Visualizers)

Please note that dust on the mirror inside the unit has little effect on the picture quality (as it is out of focal range).
However the mirror on the reflector head (#10) always has to be kept clean!

Mirror: For cleaning the mirror on the arm (#10), wipe it gently with a soft (!) and lint-free tissue (no paper!).
Normal dry cleaning should be sufficient (If not, use a special optical cleaner only!)

CAUTION: Sensitive front coated mirror!
Move the tissue in vertical direction only ! (Horizontal scratches would
cause ugly reflections) Avoid high pressure !

The glass covering the mirror inside the unit should also be kept clean.

Cabinet: Clean the cabinet by gently wiping it with a soft cloth. Never use strong cleaning agents such as
benzine or alcohol!

PRESS

here

PUSH

This w

ay

1.

2.

x

Do NOT
push this way !

Before changing a fuse disconnect the power cable. The fuse (#35) is situated behind a small lid between the
power socket and the main power switch. It can easily be opened with a small screwdriver etc. The left fuse
has to be exchanged. The right fuse is a spare fuse.

Please make sure that the fuse is put in the right way round (An arrow on the socket indicates the right
direction of the fuse).

The type of fuse is: T 4 A. Do not use any other type !

Change the fuse for a new one and switch the unit on again. If the fuse fails again contact your Visualizer dealer!

EXCHANGING A FUSE

(all Visualizers)

DO NOT USE ORDINARY GLASS CLEANER OR ALCOHOL
- THE RESULT WOULD BE A SLIGHTLY BLUE MIRROR SURFACE !

14

Advertising
This manual is related to the following products: