Seite13, Important, Transportation – WolfVision VZ-17 User Manual

Page 13: Cleaning, Exchanging a fuse

Advertising
background image

TRANSPORTATION

(all Visualizers)

IMPORTANT

IMPORTANT

During transportation put a cushion with a soft cover (like paper) between the mirror and the
working surface - in order to prevent damage to the mirror !

CLEANING

(all Visualizers)

Mirror:

ipe the mirror gently with a soft (!) and lint-free tissue (no paper!).

Normal dry cleaning or cleaning together with breathing a bit on the mirror should be sufficient (If not,
use a special optical cleaner only!)

Please note that dust on the base mirror (#2) inside the unit has little effect on the picture quality (as it is

out of the focal range). However the top mirror (#3) always has to be kept clean!
W

CAUTION: Sensitive front coated mirror!
Move the tissue in vertical direction only ! (Horizontal scratches would
cause ugly reflections) Avoid high pressure !

The glass covering the mirror inside the unit should also be kept clean.

Cabinet: Clean the cabinet by gently wiping it with a soft cloth. Never use strong cleaning agents such as
benzine or alcohol!

Before changing a fuse disconnect the power cable. The fuse (#35) is situated behind a small
lid between the power socket and the main power switch. It can easily be opened with a small
screwdriver etc.

Please make sure that the fuse is put in the right way round (An arrow on the socket indicates
the right direction of the fuse).

The type of fuse is: T 3,15A. Do not use any other type !

Change the fuse for a new one and switch the unit on again. If the fuse fails again contact your Visualizer dealer!
With most Visualizers the fuse never fails during the whole lifetime of the unit.

EXCHANGING A FUSE

(all Visualizers)

DO NOT USE ORDINARY GLASS CLEANER OR ALCOHOL
- THE RESULT WOULD BE A SLIGHTLY BLUE MIRROR SURFACE !

13

Visualizer folded

Mirror
protection

Left: spare fuse
Right: active fuse

Please note: Switch off the power before cleaning a mirror in order to make shure that the Laser Center Marker
is off. (The Laser Center Marker is automatically switched off anyway, when the mirror is turned to the outside)

Advertising
This manual is related to the following products: