WolfVision VZ-17 - Manual (Page 4)

#1 Arm
#2 Base mirror
#3 Top mirror
#4 Control pannel
#5 Synchronized lightfield (Top light)
#6 Remote Control
#7 Ventilation
#8 Air extraction
#9 Working surface with built-in
Bottom light (removable)
#10 Connectors (on the back - see next page)
#11 Lamp exchange cover
(under the removable bottom light)
This is a combined user manual for the 3 professional WolfVision Visualizer models: VZ-17, VZ-37 and
VZ-47.
It is noted in each headline if the following chapter applies to all 3 Visualizer models or just to one or two
of these models.
Therefore it is important that you check which Visualizer model you have!
#12 Upper MIRROR up and down (for scrolling)
(C
#13 ZOOM keys (enlargement)
#14 Three user programmable PRESETS
(stored by pressing one of the keys for 4
seconds, recalled by pressing quickly)
#15 Image FREEZE key (VZ-47 only!)
#16 TEXT Enhancement key
(improves the contrast for better readability)
#17 IMAGE (switches the output image on and off)
#18 MACRO (for bigger enlargements - see page 9)
#19 Manual FOCUS adjustment (see page 8)
#20 RESET (activates the Power-on preset)
an also be moved by hand! This does not
cause any harm to the motor of this mirror!)
CONTROL PANEL
(all Visualizers)
ATTENTION: Check which Visualizer model you have!
4
#21 LIGHT (switches between "Top light",
"Bottom light" and "Light off")
#22 Manual WHITE BALANCE adjustment
(see page 14)
#23 MENU (activates the on-screen menu
- see page 14)
#24 Manual IRIS (brighter and darker picture)
#25 HELP (activates the on-screen help for
the on-screen menu - This key is only
visible after pressing MENU #23)
#26 SELECT keys for on-screen menu (only
visible after pressing MENU #23)
#27 Motorized ARM up and down
#28 (Standby) POWER on and off
#29 Power LED light (red=off, green=on)