IEI Integration PCIE-Q870-i2 - Manual (Page 165)

PCIE-Q870-i2 PICMG 1.3 CPU Card
Page 148
Figure B-4: Command Mode
Step 5: The command prompt window appears. Type the following commands (marked
in red) to create two partitions. One is for the OS installation; the other is for
saving recovery files and images which will be an invisible partition.
(Press <Enter> after entering each line below)
system32> diskpart
DISKPART> list vol
DISKPART> sel disk 0
DISKPART> create part pri size= ___
DISKPART> assign letter=N
DISKPART> create part pri size= ___
DISKPART> assign letter=F
DISKPART> exit
system32> format N: /fs:ntfs /q /y
system32> format F: /fs:ntfs /q /v:Recovery /y
system32> exit