IEI Integration PCIE-Q870-i2 - Manual (Page 78)

PCIE-Q870-i2 PICMG 1.3 CPU Card
Page 61
Figure 4-14: SATA Power Drive Connection
4.5.4 USB Cable (Dual Port) with Slot Bracket
The PCIE-Q870-i2 is shipped with a dual port USB 2.0 cable. To connect the USB cable
connector, please follow the steps below.
Step 1: Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.
WARNING:
If the USB pins are not properly aligned, the USB device can burn out.
Step 2: Align the connectors. The cable has two connectors. Correctly align pin 1on
each cable connector with pin 1 on the PCIE-Q870-i2 USB connector.