IEI Integration PCIE-Q870-i2 - Manual (Page 79)

PCIE-Q870-i2 PICMG 1.3 CPU Card
Page 62
Step 3: Insert the cable connectors. Once the cable connectors are properly aligned
with the USB connectors on the PCIE-Q870-i2, connect the cable connectors to
the on-board connectors. See Figure 4-15.
Figure 4-15: Dual USB Cable Connection
Step 4: Attach the bracket to the chassis. The USB 2.0 connectors are attached to a
bracket. To secure the bracket to the chassis please refer to the installation
instructions that came with the chassis. Step 0:
4.5.5 PCIe Mini Card Installation
To install a PCIe Mini card, please follow the steps below.
Step 1: Locate the PCIe Mini card slot. The location of the PCIe Mini card slot is
shown in Chapter 3.
Step 2: Remove the retention screws. Remove the two retention screws secured on
the motherboard as shown in
8
Figure 4-16.