IEI Integration PICOe-945GSE - Manual (Page 55)

PICOe-945GSE Half-Size CPU Card
Page 55
4.2 Internal Peripheral Connectors
Internal peripheral connectors are found on the CPU card and are only accessible when
the CPU card is outside of the chassis. This section has complete descriptions of all the
internal, peripheral connectors on the PICOe-945GSE.
4.2.1 ATX Power Supply Enable Connector
CN Label: ATXCTL1
CN Type: 3-pin wafer (1x3)
CN Location: See
739H
Figure 4-3
CN Pinouts: See
740H
Table 4-3
The ATX power supply enable connector enables the PICOe-945GSE to be connected to
an ATX power supply. In default mode, the PICOe-945GSE can only us an AT power
supply. To enable an ATX power supply the AT Power Select jumper must also be
configured. Please refer to Chapter 3 for more details.
Figure 4-3: ATX Power Supply Enable Connector Location
PIN NO. DESCRIPTION
1 GND
2 PS-ON
3 +5V Standby
Table 4-3: ATX Power Supply Enable Connector Pinouts