IEI Integration PICOe-945GSE - Manual (Page 90)

PICOe-945GSE Half-Size CPU Card
Page 90
5.5.5 LVDS Voltage Selection
WARNING:
Permanent damage to the screen and PICOe-945GSE may occur if the
wrong voltage is selected with this jumper. Please refer to the user
guide that cam with the monitor to select the correct voltage.
Jumper Label: J_VLVDS1
Jumper Type: 3-pin header
Jumper Settings: See
804H
Table 5-6
Jumper Location: See
805H
Figure 5-8
The LVDS Voltage Selection jumpers allow the LVDS screen voltages to be set.
J_VLVDS1 sets the voltage connected to LVDS1. The LVDS Voltage Selection jumper
settings are shown in
806H
Table 5-6.
LCD Voltage Select Description
Short 1-2 +3.3V LVDS Default
Short 2-3 +5V LVDS
Table 5-6: LVDS Voltage Selection Jumper Settings
The LVDS Voltage Selection jumper location is shown in
807H
Figure 5-8.