3 7.1 channel audio kit installation – IEI Integration PICOe-945GSE User Manual
Page 95
PICOe-945GSE Half-Size CPU Card
Page 95
Figure 5-10: 5.1 Channel Audio Kit
Step 4:
Mount the audio kit onto the chassis. Once the audio kit is connected to the
PICOe-945GSE, secure the audio kit bracket to the system chassis.
Step 5:
Connect the audio devices. Connect one speaker to the line-in audio jack, one
speaker to the line-out audio jack and a microphone to the mic-in audio jack.
Step 6:
Install the driver. If the 5.1 channel audio kit is used, the ALC655 Realtek
codec driver must be installed. Refer to Chapter 7 for driver installation
instructions.
Step 0:
5.7.3 7.1 Channel Audio Kit Installation
NOTE:
This is an optional item that must be ordered separately. For further
information please contact the nearest PICOe-945GSE distributor,
reseller or vendor or contact an iEi sales representative directly. Send
any queries to
321H
.