IEI Integration PICOe-PV-D4251_N4551_D5251 v1.10 - Manual (Page 53)

PICOe-PV-D4251/N4551/D5251 User Manual
Page 39
 Turn all power to the PICOe-PV-D4251/N4551/D5251 off:
o When working with the PICOe-PV-D4251/N4551/D5251, make sure that
it is disconnected from all power supplies and that no electricity is being fed
into the system.
Before and during the installation of the PICOe-PV-D4251/N4551/D5251 DO NOT:
 Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
 Use the product before verifying all the cables and power connectors are
properly connected.
 Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
4.2.2 Installation Checklist
The following checklist is provided to ensure the PICOe-PV-D4251/N4551/D5251 is
properly installed.
 All the items in the packing list are present
 A compatible memory module is properly inserted into the slot
 The CF Type I or CF Type II card is properly installed into the CF socket
 The jumpers have been properly configured
 The PICOe-PV-D4251/N4551/D5251 is inserted into a chassis with adequate
ventilation
 The correct power supply is being used
 The following devices are properly connected
o Primary and secondary IDE device
o SATA drives
o Power supply
o USB cable
o Serial port cable
 The following external peripheral devices are properly connected to the
chassis:
o VGA screen
o Keyboard