IEI Integration PICOe-PV-D4251_N4551_D5251 v1.10 - Manual (Page 77)

PICOe-PV-D4251/N4551/D5251 User Manual
Page 63
Series "A" receptacle connectors are shown in Chapter 3.
Step 2: Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See
862H
Figure
4-20.
Figure 4-20: USB Connector
4.8.4 VGA Monitor Connection
The PICOe-PV-D4251/N4551/D5251 has a single female DB-15 connector on the
external peripheral interface panel. The DB-15 connector is connected to a CRT or VGA
monitor. To connect a monitor to the PICOe-PV-D4251/N4551/D5251, please follow the
instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.