IEI Integration PICOe-PV-D4251_N4551_D5251 v1.10 - Manual (Page 59)

PICOe-PV-D4251/N4551/D5251 User Manual
Page 45
4.5.2 CF Card Setup Jumper
Jumper Label: JCF1
Jumper Type: 2-pin header
Jumper Settings: See Table 4-3
Jumper Location: See Figure 4-4
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in Table 4-3.
CF Card Setup Description
Open Slave Default
Closed Master
Table 4-3: CF Card Setup Jumper Settings
Figure 4-4: CF Card Setup Jumper Location
4.5.3 CF Card Voltage Select Jumper
Jumper Label: J_VCF1
Jumper Type: 3-pin header
Jumper Settings: See Table 4-4
Jumper Location: See Figure 4-5
The CF Card Voltage Setup jumper sets the CF Card Voltage.
CF Card Voltage Setup Description
1-2 5V
2-3 3.3V Default
Table 4-4: CF Card Voltage Select Jumper Settings