IEI Integration PICOe-PV-D4251_N4551_D5251 v1.10 User Manual
Page 73
Advertising
PICOe-PV-D4251/N4551/D5251 User Manual
Page 59
Figure 4-16: Connect the LPT Device
4.7.6 Dual RS-232 Cable with Slot Bracket
The dual RS-232 cable slot connector consists of two connectors attached to two
independent cables. Each cable is then attached to a D-sub 9 male connector that is
mounted onto a slot. To install the dual RS-232 cable, please follow the steps below.
Step 1:
Locate the connectors. The locations of the RS-232 connectors are shown in
Chapter 3.
Step 2:
Insert the cable connectors. Insert one connector into each serial port box
headers. See Figure 4-17. A key on the front of the cable connectors ensures
the connector can only be installed in one direction.
Advertising