IEI Integration PICOe-B650 - Manual (Page 47)

PICOe-B650 Half-size PCIe CPU Card
Page 35
4.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
PICOe-B650 may result in permanent damage to the PICOe-B650 and
severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the PICOe-B650. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the PICOe-B650 or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
ƒ Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
ƒ Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
ƒ Use an anti-static pad: When configuring the PICOe-B650, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
PICOe-B650.
ƒ Only handle the edges of the PCB: When handling the PCB, hold the PCB
by the edges.