IEI Integration PICOe-B650 - Manual (Page 62)

PICOe-B650 Half-size PCIe CPU Card
Page 50
Figure 4-12: SATA Power Drive Connection
4.6.3 USB Cable (Dual Port) with Slot Bracket
The PICOe-B650 is shipped with a dual port USB 2.0 cable. To connect the USB cable
connector, please follow the steps below.
Step 1: Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.
WARNING:
If the USB pins are not properly aligned, the USB device can burn out.
Step 2: Align the connectors. The cable has two connectors. Correctly align pin 1on
each cable connector with pin 1 on the PICOe-B650 USB connector.
Step 3: Insert the cable connectors . Once the cable connectors are properly aligned
with the USB connectors on the PICOe-B650, connect the cable connectors to