IEI Integration PICOe-B650 - Manual (Page 66)

PICOe-B650 Half-size PCIe CPU Card
Page 54
insert the male connector from the VGA screen into the female connector on the
PICOe-B650. See
6
Figure 4-16.
Figure 4-16: VGA Connector
Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector. Step 0:
4.8 Software Installation
All the drivers for the PICOe-B650 are on the CD that came with the system. To install the
drivers, please follow the steps below.
Step 1: Insert the CD into a CD drive connected to the system.
NOTE:
If the installation program doesn't start automatically:
Click "Start->My Computer->CD Drive->autorun.exe"
Step 2: The driver main menu appears (Figure 4-17).