IEI Integration PICOe-B650 - Manual (Page 63)

PICOe-B650 Half-size PCIe CPU Card
Page 51
the on-board connectors. See Figure 4-13.
Figure 4-13: Dual USB Cable Connection
Step 4: Attach the bracket to the chassis. The USB 2.0 connectors are attached to a
bracket. To secure the bracket to the chassis please refer to the installation
instructions that came with the chassis. Step 0:
4.7 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
ƒ RJ-45 Ethernet cable connectors
ƒ USB devices
ƒ VGA monitors
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding PICOe-B650 external peripheral interface connector making
sure the pins are properly aligned.