IEI Integration HYPER-KBN - Manual (Page 123)

HYPER-KBN
P a g e 111
S te p 2: Continue to configure the Boot Option Priorities BIOS option of the client
system:
Boot Option #1  remain the default setting to boot from the original OS.
Boot Option #2  select the boot from LAN option.
S te p 3: Save changes and exit BIOS menu.
Exit  Save Changes and Exit
S te p 4: Install the auto recovery utility into the system by double clicking the
Utility/AUTORECOVERY-SETUP.exe in the One Key Recovery CD. This utility
MUST be installed in the system, otherwise, the system will automatically
restore from the factory default image every ten (10) minutes.
S te p 5: Restart the client system from LAN. If the system encounters a Blue Screen of
Death (BSoD) or a hang for around 10 minutes, it will automatically restore from
the factory default image. The following screens will show when the system
starts auto recovering.