3 so-dimm installation, So-dimm, Nstallation – IEI Integration HYPER-KBN User Manual
Page 50: Figure 4-1: so-dimm installation, 3 s o-dimm in s ta lla tio n
HYPER-KBN
P a g e 38
4.3 S O-DIMM In s ta lla tio n
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the HYPER-KBN. Please make sure the purchased SO-DIMM
complies with the memory specifications of the HYPER-KBN.
SO-DIMM specifications compliant with the HYPER-KBN are listed in
the specification table of Chapter 1.
To install an SO-DIMM, please follow the steps below and refer to Figure 4-1.
Figure 4-1: SO-DIMM Installation
S te p 1:
Locate the SO-DIMM socket. Place the board on an anti-static mat.
S te p 2:
Align the SO-DIMM with the socket. Align the notch on the memory with the
notch on the memory socket.
S te p 3:
Insert the SO-DIMM. Push the memory in at a 20º angle. (See Figure 4-1)
S te p 4:
Seat the SO-DIMM. Gently push downwards and the arms clip into place. (See