IEI Integration KINO-DH810 - Manual (Page 62)

KINO-DH810
P a g e 50
Figure 4-4: Close the Socket LGA1150
S te p 9: Connect the 12 V power to the board. Connect the 12 V power from the power
supply to the board.
4.3.2 Co o lin g Kit In s ta lla tio n
WARNING:
DO NOT attempt to install a push-pin cooling fan.
The pre-installed support bracket prevents the board from bending and
is ONLY compatible with captive screw type cooling fans.
The cooling kits can be bought from IEI. The cooling kit has a heat sink and fan.
WARNING:
Do not wipe off (accidentally or otherwise) the pre-sprayed layer of
thermal paste on the bottom of the heat sink. The thermal paste
between the CPU and the heat sink is important for optimum heat
dissipation.