IEI Integration KINO-DH810 - Manual (Page 67)

KINO-DH810
P a g e 55
Figure 4-8: Audio Connector
S te p 3: Check audio clarity. Check that the sound is coming through the right speakers
by adjusting the balance front to rear and left to right.
4.5.2 DVI Dis p la y De vic e Co n n e c tio n
The KINO-DH810 has a single female DVI connector on the external peripheral interface
panel. The DVI connector is connected to a digital display device. To connect a digital
display device to the KINO-DH810, please follow the instructions below.
S te p 1: Locate the DVI connector. The location of the DVI connector is shown in
Chapter 3.
S te p 2: Align the DVI connector. Align the male DVI connector on the digital display
device cable with the female DVI connector on the external peripheral interface.
S te p 3: Insert the DVI connector. Once the connectors are properly aligned with the
male connector, insert the male connector from the digital display device into the
female connector on the KINO-DH810. See Figure 4-9.