7 vga monitor connection, Figure 4-22: usb device connection – IEI Integration IMB-Q354 v1.20 User Manual
Page 83
IMB-Q354 microATX Motherboard
Page 69
Figure 4-22: USB Device Connection
Step 3:
Insert the device connector. Once aligned, gently insert the USB device
connector into the onboard connector.
Step 0:
4.8.7 VGA Monitor Connection
The IMB-Q354 has a single female DB-15 connector on the external peripheral interface
panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor
to the IMB-Q354, please follow the instructions below.
Step 1:
Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2:
Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3:
Insert the VGA connector
.
Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the