IEI Integration IMB-Q354 v1.20 - Manual (Page 99)

IMB-Q354 microATX Motherboard
Page 85
IR Duplex Mode [Half Duplex]
Use the IR Duplex Mode option to select the infrared port operational mode.
Full Duplex IR port mode is full-duplex
Half Duplex D EFAULT IR port mode is half-duplex
Parallel Port Address [378]
Use the Parallel Port Address option to select the parallel port base address.
Normal D EFAULT The normal parallel port mode is the standard mode
for parallel port operation.
EPP The parallel port operates in the enhanced parallel
port mode (EPP). The EPP mode supports
bi-directional communication between the system
and the parallel port device and the transmission
rates between the two are much faster than the
Normal mode.
ECP The parallel port operates in the extended capabilities
port (ECP) mode. The ECP mode supports
bi-directional communication between the system
and the parallel port device and the transmission
rates between the two are much faster than the
Normal mode.
EPP+ECP The parallel port is compatible with EPP and ECP
devices described above.
Parallel Port IRQ [IRQ7]
Use the Parallel Port IRQ selection to set the parallel port interrupt address.
IRQ5 IRQ5 is assigned as the parallel port interrupt address
IRQ7 D EFAULT IRQ7 is assigned as the parallel port interrupt address