IEI Integration IMB-Q770 - Manual (Page 81)

IMB-Q770 Mic ro -ATX Mo th e rb o a rd
P a g e 65
S te p 2: Align the connector. Align the HDMI connector with the HDMI port. Make sure
the orientation of the connector is correct
S te p 3: Insert the HDMI connector. Gently insert the HDMI connector. The connector
should engage with a gentle push. If the connector does not insert easily, check
again that the connector is aligned correctly, and that the connector is being
inserted with the right way up. S te p 0:
Figure 4-14: HDMI Connection
4.5.4 LAN Co n n e c tio n
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
S te p 1: Locate the RJ-45 connectors. The locations of the USB connectors are shown
in Chapter 4.
S te p 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the IMB-Q770. See Figure 4-15.