IEI Integration IMB-Q770 - Manual (Page 82)

IMB-Q770 Mic ro -ATX Mo th e rb o a rd
P a g e 66
Figure 4-15: LAN Connection
S te p 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector. S te p 0:
4.5.5 S e ria l De vic e Co n n e c tio n
The IMB-Q770 has a single female DB-9 connector on the external peripheral interface
panel for a serial device. Follow the steps below to connect a serial device to the
IMB-Q770.
S te p 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in
Chapter 3.
S te p 2: Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See Figure 4-16.