IEI Integration IMB-C2160 - Manual (Page 100)

IMB-C2160 Mic ro -ATX Mo th e rb o a rd
P a g e 85

Disabled Disable the serial port

Enabled D EFAULT Enable the serial port
 Ch an g e S ettin g s [Au to ]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.

IO=270h;
IRQ=11
Serial Port I/O port address is 270h and the interrupt
address is IRQ11

IO=270h;
IRQ=10, 11
Serial Port I/O port address is 270h and the interrupt
address is IRQ10, 11

IO=2E0h;
IRQ=10, 11
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ10, 11
5.3.9.4 S e ria l P o rt 10 Co n fig u ra tio n
 Serial Po rt [En ab led ]
Use the Serial Port option to enable or disable the serial port.

Disabled Disable the serial port

Enabled D EFAULT Enable the serial port
 Ch an g e S ettin g s [Au to ]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.

IO=2E0h;
IRQ=11
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ11