IEI Integration IMB-C2160 - Manual (Page 79)

IMB-C2160 Mic ro -ATX Mo th e rb o a rd
P a g e 64
Figure 4-15: LAN Connection
S te p 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector.
4.6.3 P S /2 Y-Ca b le Co n n e c tio n
The IMB-C2160 has a PS/2 connector on the external peripheral interface panel. The dual
PS/2 connector is connected to the PS/2 Y-cable that came with the IMB-C2160. One of
the PS/2 cables is connected to a keyboard and the other to a mouse to the system.
Follow the steps below to connect a keyboard and mouse to the IMB-C2160.
S te p 1: Locate the dual PS/2 connector. The location of the PS/2 connector is shown
in Chapter 3.
S te p 2: Insert the keyboard/mouse connector. Insert the PS/2 connector on the end
of the PS/2 y-cable into the external PS/2 connector. See Figure 4-16.