IEI Integration IMBA-Q454 v1.00 - Manual (Page 80)

IMBA-Q454-R10 User Manual
Page 80
Step 3: Insert the cable connectors . Once the cable connectors are properly aligned
with the USB connectors on the IMBA-Q454-R10, connect the cable connectors
to the on-board connectors. See
8
Figure 4-14.
Figure 4-14: Dual USB Cable Connection
Step 4: Attach the bracket to the chassis. The USB 2.0 connectors are attached to a
bracket. To secure the bracket to the chassis please refer to the installation
instructions that came with the chassis. Step 0:
4.5.6 USB Cable (Four Port)
Four port USB 2.0 cables can be separately purchased from IEI. To install a four port USB
cable onto the IMBA-Q454-R10, please follow the steps below.