IEI Integration IMBA-Q454 v1.00 - Manual (Page 98)

IMBA-Q454-R10 User Manual
Page 98
Î
AHCI The SATA drive connected to the nth SATA drive port is
specified as a normal SATA drive.
Î IDE Master and IDE Slave
When entering setup, BIOS automatically detects the presence of IDE devices. BIOS
displays the status of the auto detected IDE devices. The following IDE devices are
detected and are shown in the IDE Configuration menu:
ƒ Primary IDE Master
ƒ Primary IDE Slave
ƒ Secondary IDE Master
ƒ Secondary IDE Slave
ƒ Third IDE Master
ƒ Fourth IDE Master
The IDE Configuration menu (Error! Reference source not found.) allows changes to the
configurations for the IDE devices installed in the system. If an IDE device is detected and
one of the above listed four BIOS configuration options are selected, the IDE configuration
options shown in Section 5.3.2.1 appear.
5.3.2.1 IDE Master, IDE Slave
Use the IDE Master and IDE Slave configuration menu to view both primary and
secondary IDE device details and configure the IDE devices connected to the system.