IEI Integration IMBA-C2260-i2 - Manual (Page 85)

IMBA-C2260-i2 ATX Motherboard
Page 68
4.5.4 mSATA Slot Setup
The mSATA Slot Setup jumper specifies whether to automatically detect the mSATA
device installed in the mSATA card slot (CN2). If the user shorts the mSATA Slot Setup
jumper to force the system to enable mSATA device, the S_ATA6 connector will be
disabled.
Setting Description
Open Automatically detect mSATA device (Default)
Short 1-2
Force to enable mSATA device
(The S_ATA6 connector will be disabled)
Table 4-3: mSATA Slot Setup Jumper Settings
Figure 4-14: mSATA Slot Setup Jumper Location
4.5.5 PCIe x16 Interface Setup
The PCIe x16 interface setup is made through the BIOS menu in “Chipset Æ PCH-IO
Configuration”. Use the PEG port configuration BIOS option to configure the PCIe x16
channel mode.